Latest From The Blog

Communication Model in IoT

By |September 21st, 2022|Categories: blog|

Communication Model in IoT Today we are learning about the communications Model. How will the communication Model happen? How does it follow the different standards to communicate [...]

Analog Input from LDR

By |September 12th, 2022|Categories: blog|

Analog Input from LDR and Data Manipulation in Arduino utilizing map Process Basics Foundation For IoT and Embedded Systems Here in this video, we cover all About [...]

Communication Model in IoT

Communication Model in IoT Today we are learning about the communications Model. How will the communication Model happen? How does it follow the different standards to communicate the two or more devices for communication? Today [...]

By |September 21st, 2022|Categories: blog|0 Comments

Analog Input from Sensor

Start Working with Analog Input from Sensor, Display the value on Serial Monitor in Arduino UNO This project explains how to take input from the sensor and then how to analyse and use it in [...]

By |September 18th, 2022|Categories: blog|0 Comments

Analog Input from LDR

Analog Input from LDR and Data Manipulation in Arduino utilizing map Process Basics Foundation For IoT and Embedded Systems Here in this video, we cover all About how to take input from LDR, Also its [...]

By |September 12th, 2022|Categories: blog|0 Comments

Level converter MAX232 is very essential when we are interfacing the digital hardware (controller) to the computer via serial mode. The computer serial port use RS 232 protocol and controller works on the TTL logic. These two hardware need to synchronize with each other for the proper communications. To solve this problem MAX 232 IC is used, this IC convert RS232 signal to TTL and TTL to RS232. Hence we can exchange few words of our controller with the computer via serial mode and various applications can be designed. Therefore level converter board is designed for the serial communication between controller and computer. This board is used where computer control hardware are designed.

2017-04-19T10:36:27+00:00

Level converter MAX232 is very essential when we are interfacing the digital hardware (controller) to the computer via serial mode. The computer serial port use RS 232 protocol and controller works on the TTL logic. These two hardware need to synchronize with each other for the proper communications. To solve this problem MAX 232 IC is used, this IC convert RS232 signal to TTL and TTL to RS232. Hence we can exchange few words of our controller with the computer via serial mode and various applications can be designed. Therefore level converter board is designed for the serial communication between controller and computer. This board is used where computer control hardware are designed.

2022-09-10T11:23:16+00:00

New Courses

Contact Info

193B/2, 9th Street, Indirapriyadharshini Nagar, Perumbakkam, Chennai - 600100

Phone: 9350056982

Mobile: 9350056982

Fax: 458 761-9562

Web: EdITS WORLD

Recent Posts

Go to Top